Products being added daily.
{"id":4336469606436,"title":"Ruby Elite Sump 36\" x 18\"","handle":"ruby-elite-sump-36-x-18","description":"\u003cp\u003eTrigger Systems specializes in aquarium sump manufacturing and are based here in the USA (Dallas, TX). All Trigger sumps come with a full top support brace which is made of a solid piece of material to prevent bowing over time from the humidity and water pressure. They also round the corners instead of squaring them which exponentially increases the strength of the corners.\u003c\/p\u003e\n\u003cp\u003eThe RUBY36E sump is loaded with features and comes with the trademark dark RUBY translucent red material. This sump is unique in that it offers independent flow through the refugium. This is important as some types of algae require slow flow. The rest of the sump maintains a higher flow rated to the aquarium turn over desired. Some features of the RUBY36E sump are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 position probe holder\u003c\/li\u003e\n\u003cli\u003eAdjustable water level\u003c\/li\u003e\n\u003cli\u003eRUBY red wall to block light and prevent unwanted algae growth in skimmer section\u003c\/li\u003e\n\u003cli\u003eLocking filter sock holder\u003c\/li\u003e\n\u003cli\u003eFoam filter block\u003c\/li\u003e\n\u003cli\u003eProtein skimmer section\u003c\/li\u003e\n\u003cli\u003eDedicated refugium section with independent flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSection Details \u0026amp; Water Flow Path\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RUBY36E has 3 main sections. Section 1 is the refugium section. The flow rate through the refugium can be controlled based on the type of algae that is housed there. There are several ways to feed water into the refugium.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSplit or use one of the drain lines from the tank\u003c\/li\u003e\n\u003cli\u003eTee off from the return pump\u003c\/li\u003e\n\u003cli\u003eUse a small pump that sits inside the sump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf splitting off one of the drains from the tank is the method chosen, then it is recommended to put valves on both lines after the split to control flow. Water flows from the refugium into Section 2.\u003c\/p\u003e\n\u003cp\u003eSection 2 is where the water from the main tank enters through the filter socks. This is the section where the protein skimmer typically sits. Water from this section goes over a baffle and through a foam block filter and then under a baffle into Section 3.\u003c\/p\u003e\n\u003cp\u003eSection 3 is the return section where the return pump will sit, pumping water back to the display tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Water Level\u003c\/strong\u003e\u003cbr\u003eWater level in the sump is adjustable from 7″ to 9.5″ to accommodate water height requirements for different protein skimmers. Simply move the baffle to the desired height location and tighten the two bolts to hold in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree Slot Probe Holder\u003c\/strong\u003e\u003cbr\u003eThe RUBY36E sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDraw String Tabs\u003c\/strong\u003e\u003cbr\u003eTabs are located on the top support brace in front of the 1” bulkhead fittings which are included. The purpose of these tabs is to provide a location for tying off 7” diameter filter socks that have draw strings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLocking Filter Sock Holder\u003c\/strong\u003e\u003cbr\u003eFilter socks snap and lock into the filter sock holders to secure the filter sock from falling out when it becomes clogged and needs to be cleaned or replaced. The 4” filter socks are 100 micron rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 36″ long x 18″ wide x 15″ high\u003c\/li\u003e\n\u003cli\u003eDrain\/Skimmer Section: 17.5″ x 12.5″\u003c\/li\u003e\n\u003cli\u003eCenter\/Refugium Section: 22.75″ x 8.625″\u003c\/li\u003e\n\u003cli\u003eReturn Pump Section: 19.5″ x 8.625″\u003c\/li\u003e\n\u003cli\u003eTotal Water Volume: 41.7 gallons\u003c\/li\u003e\n\u003cli\u003eSkimmer Water Level: 7″ to 10″ adjustable\u003c\/li\u003e\n\u003cli\u003eDrain Input Fitting: 1″ (x2)\u003c\/li\u003e\n\u003cli\u003eRefugium Input Fitting: 1″ (x2)\u003c\/li\u003e\n\u003cli\u003eFilter Sock: 4″ (x2)\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2019-11-04T20:21:37-06:00","created_at":"2019-11-04T20:52:21-06:00","vendor":"Trigger Systems","type":"Sump","tags":["36\" x 18\""],"price":45999,"price_min":45999,"price_max":45999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31107275358244,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RUBY36E","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ruby Elite Sump 36\" x 18\"","public_title":null,"options":["Default Title"],"price":45999,"weight":29484,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0227\/4721\/7956\/products\/RUBY36E_1.png?v=1582607229"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0227\/4721\/7956\/products\/RUBY36E_1.png?v=1582607229","options":["Title"],"media":[{"alt":"Ruby Elite Sump 36\" x 18\" - Corals Fish and Beyond","id":5565286580260,"position":1,"preview_image":{"aspect_ratio":1.412,"height":1700,"width":2400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0227\/4721\/7956\/products\/RUBY36E_1.png?v=1572922341"},"aspect_ratio":1.412,"height":1700,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0227\/4721\/7956\/products\/RUBY36E_1.png?v=1572922341","width":2400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eTrigger Systems specializes in aquarium sump manufacturing and are based here in the USA (Dallas, TX). All Trigger sumps come with a full top support brace which is made of a solid piece of material to prevent bowing over time from the humidity and water pressure. They also round the corners instead of squaring them which exponentially increases the strength of the corners.\u003c\/p\u003e\n\u003cp\u003eThe RUBY36E sump is loaded with features and comes with the trademark dark RUBY translucent red material. This sump is unique in that it offers independent flow through the refugium. This is important as some types of algae require slow flow. The rest of the sump maintains a higher flow rated to the aquarium turn over desired. Some features of the RUBY36E sump are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 position probe holder\u003c\/li\u003e\n\u003cli\u003eAdjustable water level\u003c\/li\u003e\n\u003cli\u003eRUBY red wall to block light and prevent unwanted algae growth in skimmer section\u003c\/li\u003e\n\u003cli\u003eLocking filter sock holder\u003c\/li\u003e\n\u003cli\u003eFoam filter block\u003c\/li\u003e\n\u003cli\u003eProtein skimmer section\u003c\/li\u003e\n\u003cli\u003eDedicated refugium section with independent flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSection Details \u0026amp; Water Flow Path\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe RUBY36E has 3 main sections. Section 1 is the refugium section. The flow rate through the refugium can be controlled based on the type of algae that is housed there. There are several ways to feed water into the refugium.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSplit or use one of the drain lines from the tank\u003c\/li\u003e\n\u003cli\u003eTee off from the return pump\u003c\/li\u003e\n\u003cli\u003eUse a small pump that sits inside the sump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf splitting off one of the drains from the tank is the method chosen, then it is recommended to put valves on both lines after the split to control flow. Water flows from the refugium into Section 2.\u003c\/p\u003e\n\u003cp\u003eSection 2 is where the water from the main tank enters through the filter socks. This is the section where the protein skimmer typically sits. Water from this section goes over a baffle and through a foam block filter and then under a baffle into Section 3.\u003c\/p\u003e\n\u003cp\u003eSection 3 is the return section where the return pump will sit, pumping water back to the display tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Water Level\u003c\/strong\u003e\u003cbr\u003eWater level in the sump is adjustable from 7″ to 9.5″ to accommodate water height requirements for different protein skimmers. Simply move the baffle to the desired height location and tighten the two bolts to hold in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree Slot Probe Holder\u003c\/strong\u003e\u003cbr\u003eThe RUBY36E sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDraw String Tabs\u003c\/strong\u003e\u003cbr\u003eTabs are located on the top support brace in front of the 1” bulkhead fittings which are included. The purpose of these tabs is to provide a location for tying off 7” diameter filter socks that have draw strings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLocking Filter Sock Holder\u003c\/strong\u003e\u003cbr\u003eFilter socks snap and lock into the filter sock holders to secure the filter sock from falling out when it becomes clogged and needs to be cleaned or replaced. The 4” filter socks are 100 micron rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 36″ long x 18″ wide x 15″ high\u003c\/li\u003e\n\u003cli\u003eDrain\/Skimmer Section: 17.5″ x 12.5″\u003c\/li\u003e\n\u003cli\u003eCenter\/Refugium Section: 22.75″ x 8.625″\u003c\/li\u003e\n\u003cli\u003eReturn Pump Section: 19.5″ x 8.625″\u003c\/li\u003e\n\u003cli\u003eTotal Water Volume: 41.7 gallons\u003c\/li\u003e\n\u003cli\u003eSkimmer Water Level: 7″ to 10″ adjustable\u003c\/li\u003e\n\u003cli\u003eDrain Input Fitting: 1″ (x2)\u003c\/li\u003e\n\u003cli\u003eRefugium Input Fitting: 1″ (x2)\u003c\/li\u003e\n\u003cli\u003eFilter Sock: 4″ (x2)\u003c\/li\u003e\n\u003c\/ul\u003e"}

Ruby Elite Sump 36" x 18"

Product Description
$459.99
Maximum quantity available reached.

Trigger Systems specializes in aquarium sump manufacturing and are based here in the USA (Dallas, TX). All Trigger sumps come with a full top support brace which is made of a solid piece of material to prevent bowing over time from the humidity and water pressure. They also round the corners instead of squaring them which exponentially increases the strength of the corners.

The RUBY36E sump is loaded with features and comes with the trademark dark RUBY translucent red material. This sump is unique in that it offers independent flow through the refugium. This is important as some types of algae require slow flow. The rest of the sump maintains a higher flow rated to the aquarium turn over desired. Some features of the RUBY36E sump are:

  • 3 position probe holder
  • Adjustable water level
  • RUBY red wall to block light and prevent unwanted algae growth in skimmer section
  • Locking filter sock holder
  • Foam filter block
  • Protein skimmer section
  • Dedicated refugium section with independent flow

Section Details & Water Flow Path

The RUBY36E has 3 main sections. Section 1 is the refugium section. The flow rate through the refugium can be controlled based on the type of algae that is housed there. There are several ways to feed water into the refugium.

  • Split or use one of the drain lines from the tank
  • Tee off from the return pump
  • Use a small pump that sits inside the sump

If splitting off one of the drains from the tank is the method chosen, then it is recommended to put valves on both lines after the split to control flow. Water flows from the refugium into Section 2.

Section 2 is where the water from the main tank enters through the filter socks. This is the section where the protein skimmer typically sits. Water from this section goes over a baffle and through a foam block filter and then under a baffle into Section 3.

Section 3 is the return section where the return pump will sit, pumping water back to the display tank.

Adjustable Water Level
Water level in the sump is adjustable from 7″ to 9.5″ to accommodate water height requirements for different protein skimmers. Simply move the baffle to the desired height location and tighten the two bolts to hold in place.

Three Slot Probe Holder
The RUBY36E sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.

Draw String Tabs
Tabs are located on the top support brace in front of the 1” bulkhead fittings which are included. The purpose of these tabs is to provide a location for tying off 7” diameter filter socks that have draw strings.

Locking Filter Sock Holder
Filter socks snap and lock into the filter sock holders to secure the filter sock from falling out when it becomes clogged and needs to be cleaned or replaced. The 4” filter socks are 100 micron rating.

Specifications

  • Dimensions: 36″ long x 18″ wide x 15″ high
  • Drain/Skimmer Section: 17.5″ x 12.5″
  • Center/Refugium Section: 22.75″ x 8.625″
  • Return Pump Section: 19.5″ x 8.625″
  • Total Water Volume: 41.7 gallons
  • Skimmer Water Level: 7″ to 10″ adjustable
  • Drain Input Fitting: 1″ (x2)
  • Refugium Input Fitting: 1″ (x2)
  • Filter Sock: 4″ (x2)

Related products  

x